home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d16
/
tsng4311.arc
/
WIN30DRV.DOC
< prev
Wrap
Text File
|
1991-01-30
|
2KB
|
56 lines
SpeedSTAR DRIVER INSTALLATION
FOR MICROSOFT WINDOWS 3.0
The instructions which follow are applicable to users of
Microsoft Windows 3.0 and the SpeedSTAR SVGA. Note that, to use
800x600 and 1024x768 modes, an ANALOG color display capable of
these high resolutions is required.
The "SpeedSTAR SVGA - Windows 3.0 Driver Disk" contains 256 color
and high-resolution drivers, as well as a file called SETUP.INF
that replaces the files of the same name on the Microsoft Windows
3.0 Setup 5.25" "DISK 1" diskette. Follow the instructions listed
below carefully to install the drivers.
Instructions:
1. Make a DISKCOPY of the Setup "Disk 1" diskette.
Example (for systems with a single floppy and hard drive):
C:>DISKCOPY A: A:
The system will use drive A: for both the original and the
copy as the source and target diskettes are inserted
alternately for the copy.
2. After the copy is made, return the original to its jacket and
store safely.
3. Copy the file SETUP.INF from the SpeedSTAR SVGA - Windows 3.0
Driver Disk to the newly-created copy of the Setup "Disk 1"
diskette. Example (for systems with a single floppy and hard
drive):
C:>COPY A:SETUP.INF B:
The system will use drive A: as drive B: also. After the copy
is finished, type A: [ENTER].
4. Type SETUP [ENTER] to begin installation of Windows 3.0.
5. Review the configuration list when it is shown. If you wish to
change Display type, move the cursor (highlighted line) to the
"Display:" line and press [ENTER] to select from the available
list.
6. The program will ask you to insert the SpeedSTAR SVGA -
Windows 3.0 Driver Disk in order to install the drivers as
required. After this is done, the installation program will
continue normally.
After you complete the above steps you can begin using Windows 3.0.
Note: If you wish to change the display type after completing the
installation, click on the Windows Setup icon found in the Main
desktop window.